Limb reconstruction, complex joint replacement and revision, foot and ankle, osseointegration and trauma — every complex case modelled in 3D by the surgeon who operates, with titanium implants designed from the patient’s own CT when nothing off the shelf will fit. Trained in Sydney, Switzerland and Spain. From a first joint replacement to the cases other practices refer on.
Call the rooms
FRACS
SPECIALIST ORTHOPAEDIC SURGEON
4
SYDNEY HOSPITALS + ABU DHABI
3
COUNTRIES OF FELLOWSHIP TRAINING
11
PUBLICATIONS
WHO YOU’LL MEET
Meet Dr Mustafa Alttahir.
Dr Mustafa Alttahir is a Sydney orthopaedic surgeon whose practice centres on limb reconstruction and revision joint replacement. He operates on the problems that are hardest to put right — joint replacements that have failed, fractures that have not healed, limbs left short or deformed, bone lost to injury or infection, and anatomy no standard implant was made for.
The same surgeon, and the same preparation, are behind first-time hip, knee and ankle replacement, foot and ankle surgery, sports injuries, osseointegration and fracture surgery. Every operation is planned before it is performed: the whole limb is measured, the CT is modelled in three dimensions when the anatomy calls for it, and where no standard implant will fit he designs one himself. He then carries out the operation he has planned.
He completed fellowship training in Sydney with Professor Munjed Al Muderis, Professor Kevin Tetsworth and Dr Tim O’Carrigan, and, through an IBRA fellowship, in Switzerland and Spain with Professor Victor Valderrabano and Professor Mario Herrera-Perez — centres that advanced modern limb reconstruction, ankle replacement and 3D-planned surgery.
He operates at four Sydney hospitals, is a visiting surgeon in Abu Dhabi, and reviews every 3D model with the patient before a decision is made.

Macquarie University Hospital
·
Norwest Private Hospital
·
Campbelltown Private Hospital
·
East Sydney Private Hospital
·
Burjeel Medical City, Abu Dhabi
·
Royal Australasian College of Surgeons
·
Australian Orthopaedic Association
·
International Bone Research Association
·
Osseointegration Group of Australia
·
Australian Orthopaedic Foot & Ankle Society
·
Australian and New Zealand Limb Reconstruction Society
·
THE DIFFERENCE
Some problems don’t fit a standard operation: severe deformity, bone loss, infection, a joint replacement that has failed, a fracture that hasn’t healed, anatomy a stock implant was never designed for. These are the cases that get referred on — and the ones this practice is built to receive.
The discipline they demand — planning each case in detail, in three dimensions when the anatomy calls for it; choosing the implant for the patient rather than the reverse; preparing for what could go wrong — is the same discipline brought to a first knee, hip or ankle replacement here.
Below is that discipline made visible: six stages from CT scan to sterilised custom implant, every one performed or directed by the operating surgeon, and the model reviewed with you in the room.
Stage 01 — Imaging.
THE FOUNDATION
A first-time hip or knee replacement and a limb salvage are planned by the same surgeon, with the same two disciplines. One is why straightforward cases stay straightforward; the other is why difficult ones can be taken on at all.
F.01
FOUNDATION SKILL
Bone that won’t heal. Limbs shorter than they should be. Deformity built up over years. Reconstruction after trauma, infection, or failed surgery. Ilizarov and hexapod frames, magnetic lengthening nails, osteotomy, bone transport, osseointegration.
A surgeon who rebuilds limbs reads the whole leg before replacing a joint — alignment, rotation, length, bone quality. It is why routine hip, knee, ankle and foot surgery here is planned from standing alignment films (EOS scans), weight-bearing CT and, where they help, 3D models — and why an operation that has failed can be rebuilt.
LIMB RECONSTRUCTION
F.02
FOUNDATION SKILL
Surgeon-led CT-based modelling, deformity analysis, patient-specific guide design and the planning of custom 3D-printed titanium implants — done by the surgeon himself in Materialise Mimics and 3‑matic, occasionally SolidWorks, with engineering support for manufacture.
Most operations never need a custom implant: a routine hip, knee or ankle replacement is measured and planned from your own imaging in the same detail, then performed with a standard, established implant. When standard implants won’t fit the anatomy, the plan becomes a surgeon-designed implant — modelled, reviewed with you, and manufactured to the millimetre.
3D PLANNING & CUSTOM IMPLANTS
EXAMPLES OF CAPABILITIES
Where the standard approach ends.
Four examples, not the full list — operations that are not widely offered, chosen to show how a problem is approached here when a standard operation is not enough: what each one is, who it is for, and what is still uncertain about it.
01
ANKLE · TALAR COLLAPSE · AVASCULAR NECROSIS
Custom 3D-printed talus component
When part of the talus — the keystone bone of the ankle — has collapsed from avascular necrosis or injury, a standard ankle replacement has no sound bone to sit on, and the usual answer is a fusion. Dr Alttahir designs a patient-specific 3D-printed implant that fills the missing part of the talus and carries the talar component of a total ankle replacement — so the ankle can be replaced rather than fused, with the aim of keeping its movement. It is a salvage procedure with limited long-term data, considered case by case.
02
HIP · KNEE · SEVERE BONE LOSS · SURGEON-DESIGNED
Surgeon-designed custom implants
Custom titanium implants designed by Dr Alttahir himself from the patient’s own CT and printed by manufacturers working under the TGA’s requirements for patient-matched devices: triflange cups that anchor to ilium, ischium and pubis when a hip socket has lost too much bone for any standard cup; cones and augments for bone lost around a failed knee; plates and guides shaped to one person’s anatomy. The design stays with the surgeon who will implant it, so each one is designed around how it will actually go in — the surgical approach, the instruments and the fixation — and not only around the shape on the scan.
03
AMPUTEES · SOCKET PROBLEMS · MACQUARIE UNIVERSITY HOSPITAL
Osseointegration
Direct skeletal attachment of a prosthetic limb for amputees who cannot tolerate a socket: the implant becomes part of the bone and the prosthesis clips on. Fellowship training completed with Professor Munjed Al Muderis, who pioneered single-stage press-fit osseointegration worldwide; surgery at Macquarie University Hospital with a dedicated aftercare team, and at Burjeel Medical City in Abu Dhabi; consultations at any of the rooms, or by telehealth for interstate and international patients.
04
KNEE · REVISION · ROBOTIC · 3D-PLANNED
Robotic revision knee replacement
In revision knee surgery the operation is planned on a 3D model of the remaining bone, and robotic assistance guides most of the bone cuts for the revision implant — so the cuts made in theatre are the ones that were planned. It is an uncommon use of a system designed for first-time knee replacement, and it is discussed with you before the operation. A precision tool in the hands of a surgeon trained to know when it helps and when it doesn’t.
SCOPE OF PRACTICE
A wide range of surgery.
From sports injuries and fractures to joint replacement and limb reconstruction. These are the operations performed most often — not a complete list, so ask the rooms if yours is not here. Each page is also under Procedures in the menu above.
Anterior hip replacement
Muscle-sparing approach · early mobilisation
Robotic knee replacement
X-ray-planned · ROSA robotic
Partial knee replacement
Arthritis in one compartment of the knee · ROSA Partial Knee
Total ankle replacement
Motion-preserving alternative to fusion
Revision hip replacement
Failed or painful previous hip
Revision knee replacement
Loosening · instability · infection
Revision ankle surgery
Failed ankle replacement or fusion
Custom 3D-printed implants
Surgeon-designed · when no standard implant fits
THE SURGEON
Dr Alttahir completed medicine at UNSW, Australian orthopaedic training across NSW and the ACT, and subspecialty fellowships in Sydney and, through an IBRA fellowship, in Switzerland and Spain — in centres that advanced modern limb reconstruction, ankle replacement and 3D-planned surgery.
He arrived in Australia as an Iraqi refugee at fourteen. The full story — and why it shapes how he treats patients who have been told nothing more can be done — is on the About page.
FELLOWSHIP SUPERVISORS
Professor Munjed Al Muderis
MACQUARIE, SYDNEY
Osseointegration · complex arthroplasty
Professor Kevin Tetsworth
MACQUARIE, SYDNEY
Professor Victor Valderrabano
SWITZERLAND
Total ankle replacement
Professor Mario Herrera-Perez
SPAIN
Complex foot & ankle
Dr Tim O’Carrigan
MACQUARIE, SYDNEY
Limb reconstruction · ankle replacement
Prince of Wales Foot & Ankle
RANDWICK, SYDNEY
Foot & ankle surgery — Lunz, Negrine, Ling
MBBS BSc(Med)
UNSW
FRACS (Orth)
RACS
FAOrthA
AOA
SECOND OPINIONS
Three kinds of second opinion.
FOR REFERRERS
Referrals are welcome from GPs, specialists and allied health practitioners, by fax, email or secure messaging. Complex cases can be discussed by phone before referring, urgent cases are triaged the same day, and a letter usually follows every consultation and operation.
EMERGENCY
Same day
Open fracture
Compartment syndrome
A limb without circulation or sensation
A septic patient
Dislocated joint replacement
Call 000 or send to the nearest emergency department, then phone the rooms. Dislocated joint replacement: phone the rooms first so admission can be arranged.
URGENT
Phone the rooms the same day
Suspected joint replacement infection, stable patient
Fracture around an implant
Wound breakdown
Sudden instability of a replaced joint
Recently replaced joint that has become painful
Acute deformity after trauma
Admission or an appointment is arranged from that call.
PRIORITY
Within 10 days
Painful or loosening joint replacement
Non-union
Progressive or complex deformity
Failed ankle surgery
Second opinion before a booked operation
Complex cases can be discussed by phone before referring.
ROUTINE
Usually within 1–4 weeks
Hip, knee and ankle arthritis
Bunions, forefoot, flat foot and high arch
Sports knee and ankle injuries, ankle instability
Patellar instability, bow legs and knock knees
Limb-length difference and deformity
Hand, wrist and tendon problems
Osseointegration and neuromuscular assessment
Other second opinions
Seen at Macquarie, Norwest or Campbelltown — whichever suits the patient.
Timeframes are targets for the first appointment, not guarantees; urgent cases are triaged by phone on the day. The full triage guide is on the For Referrers page.
COMMON QUESTIONS
LOCATIONS
Consulting rooms at Macquarie University Hospital, Norwest Private Hospital and Campbelltown Private Hospital, and surgery at all four Sydney hospitals including East Sydney Private Hospital — through Sydney Advanced Orthopaedics and Limb Reconstruction Service New South Wales, hence the two phone numbers.
Macquarie University Hospital
MACQUARIE PARK
Complex arthroplasty · limb reconstruction · osseointegration · trauma
Consulting Thursdays · Complex Limb Reconstruction Clinic every second Thursday
(02) 8882 9011
Norwest Private Hospital
BELLA VISTA
Arthroplasty · foot & ankle · trauma
Consulting Friday mornings
(02) 8882 9011
Campbelltown Private Hospital
CAMPBELLTOWN
Arthroplasty · foot & ankle · trauma
Consulting Tuesdays
(02) 9602 1113
East Sydney Private Hospital
WOOLLOOMOOLOO
Arthroplasty · foot & ankle · trauma
Surgery only — consultations at Macquarie or Norwest
(02) 8882 9011
Burjeel Medical City
ABU DHABI · UAE
Limb reconstruction · revision arthroplasty · osseointegration · foot & ankle
Visiting surgeon — quarterly visits to the Al Muderis Osseointegration Clinic at the Paley Middle East Clinic. Dates are confirmed through the Sydney rooms.
Most procedures are available at all four Sydney hospitals, and Dr Alttahir performs the same operations as a visiting surgeon at Burjeel Medical City, Abu Dhabi. In Sydney, complex limb reconstruction, osseointegration and major revision surgery are centred at Macquarie University Hospital.
BEGIN
CALL THE ROOMS
info@alttahir.com.au
Appointments are made by phone.
Reception: 8:30am–5pm, Monday to Friday.
Telehealth: interstate and international patients, and local patients by agreement with Dr Alttahir. New local patients are seen in person.
After hours
Urgent concern after recent surgery: ring the ward where you had your operation. It can reach Dr Alttahir.
Cannot get through: go to the Norwest Private Hospital emergency department or the WiSE Specialist Emergency Clinic, and let the rooms know so he can be involved in your care.
Life-threatening: call 000.
Send an enquiry
REPLIES USUALLY WITHIN ONE TO TWO BUSINESS DAYS
This website provides general information about orthopaedic surgery and is not a substitute for individual medical advice. All surgery carries risk; outcomes vary between patients. Diagrams are schematic and illustrative only. Advertising on this site complies with the AHPRA Guidelines for advertising a regulated health service.



